The milking stool is an ideal support for your laser scanner or targets where low and/or awkward set ups are required, for example on a retaining wall. The rigid construction ensures a precise location and is further enhanced by the small detail pole. It weights 2Kg and fits into a box of 20cm x 20cm x 20cm. The base is...
SCCS News
-
SmartWorx Viva v3.50 – update overview
SmartWorx Viva v3.50 – update overview With SmartWorx Viva v3.50: It is now possible to sketch on a variety of different “sheets of paper” including; narrow lined paper; large spaced lined paper; small grid & large grid. An additional way to export ASCII data has been added. From the main menu choose Jobs & Data and then 2 Export &... -
GNSS SmartRover Hire Kits – configured and read-to-go!
GNSS SmartRover Hire Kits – configured and read-to-go! SCCS has an extensive fleet of 900, 1200 and Viva SmartRovers for hire. Each instrument is checked and certified prior to hire, configured with a “SmartNet MAIN” style configuration-set. This config-set includes all the parameters and licenses necessary to connect to SmartNet. It is therefore advised that customers do not re-configured the... -
Leica CloudWorx Products Updates
Several Leica CloudWorx products have a small but important update. With the recent introduction of the new Clipping Manager in several of the Leica CloudWorx products we found a limitation that we felt was important to resolve. This release of these several versions addresses that issue. With the new clipping manager, limit box or slice is added to the previous... -
Setting up Leica Uno to log raw data
Setting up Leica Uno, to log raw data The equipment setup described is to enable an Uno to log static obs over. The Viva Uno instrument consists of the CS field controller (CS10/CS15) and the GNSS antenna cap (GS05/GS06) attached to the CS field controller. 1. Set up the tripod. 2. Mount and level the tribrach on the tripod. 3...